Fiat Grande Punto Steering Column
Which Grande is mine?
Fiat Grande Puntos range from 2006 - September 2008.
Our remanufactured electric steering column for Fiat Grande Puntos part No.55701323 or 55704064 will fit all Grande Punto models in this year range, however if your Grande Punto is a 1.9 Sporting or 1.4 16 Valve, with an ASR button (traction control) on the dashboard you will need a 7 Wire column part number 55703373 or 55704060.
Our range of remanufactured steering columns for the Grande punto are plug and play with no coding or programming required.
Take a look at our blog post for some more information about Fiat Grande Punto steering column problems here,
Fiat Grande Punto electric power steering faults.
Fiat Grande Punto introduced in 2006 (199 chassis) uses a Delphi electric power steering column. The steering column fitted in the grande punto is a new design completely different from the older punto (188 chassis).
The power steering column/motor/ecu on the grande punto is one integral unit. The motor/ecu does not separate from the column body. If a fault develops anywhere within the electric power steering eps column, then the complete column must be changed.
From 2006 through to September 2008 the grande punto electric power steering column remains essentially the same the only variant was, models, fitted with traction control (fiat call this ASR). This was seen on 1.9 sporting and 1.4 16 valve models.
In order to check on the part number of your grande punto eps column, you need to look at your Grande Punto electric power steering column…
You will then need to look at the underside of the column where the electrical connections into the eps column are situated.
You will see a label like this…
The important part number is the one that being Located where the arrow is indicating, beginning with
Dwg FIAT: and the either 55701323 OR 55704064 for all standard Grande punto models these are both interchangeable.
OR 55703373 this is the 7wire column unit fitted to the vehicles with ASR, typically 1.9 sporting and 1.4 16 valve models.
The main reason for the failure of the electric power steering column on the grande punto is the torque position sensor failing, this can result in a groaning vibration when turning the steering wheel which will eventually lead to the steering failure light/ message illuminating on the dash display.
The EPS motor/control unit can also fail sometimes intermittently whereby the steering will work some times and not work at other times.
For either of these types of failures, the complete eps column will need to be replaced. Our range of remanufactured exchange electric steering columns for the punto are rebuilt to the highest standards and we use some heavier duty components in the rebuild to ensure that we do not see repeat failures for the faults described the columns also come with the peace of mind with a lifetime warranty.