BMW 5 Series F10 Electric Steering Rack

The BMW 5 series F models were introduced in 2010 through to 2017 uses a new design of electric power steering rack.
The f10 / f11 / f07 steering rack can fail for a variety of different reasons.

There can be an internal electrical failure of the control module that will case the eps to fail and the steering failure message to illuminate on the dash. The module will often not communicate with a scanner to read any fault codes.

The steering racks can also suffer from mechanical failure of different types. The rack teeth can wear unevenly causing a knock when turning the steering wheel. As well as a knock when on bumpy ground.

Water ingress can also be in issue that can cause the rack to make a grinding noise when turning the steering wheel.
The mounting bolts that secure the motor to the steering rack body can also shear this in turn causes the motor to come loose and even fall off of the rack in some cases.

Our reconditioned exchange steering racks for the F models will cure any of these failures that we have described.
When replacing the F series steering rack it may be necessary  to follow an adaptation process using a scanner or software to ensure correct operation of the new rack.
There are many different part numbers for these steering racks, if you don’t know yours here please look at the images to see what unit yours looks most like.
If you are unsure whether it is the correct part don’t hesitate to call us.

THIS ITEM IS AN OUTRIGHT PURCHASE WE DO NOT

REQUIRE YOUR OLD UNIT BACK